Carsan Engineering, Inc.

Carsan Engineering, Inc.
221 Corporate Circle
Suite H
Golden, CO 80401
(303) 237-9608

CE301AXE, CE301BXE, and CE301CXE

Xenon Power Supply Specification

The CE300 power supply is designed to run xenon arc lamps in a constant-current mode. The supply is designed to run the Osram XBO 300 and Cermax family lamps. The output power is adjustable from 270 to 315 Watts with a built-in potentiometer. EMI line-filtering is built-in to the unit. The CE260BXE is the same as the A-model except it does not have Y-capacitors in the line filter section. The CE301BXE has smaller Y-capacitors to meet the 100 mA leakage requirement of many U.S. hospitals.

Output power: 270 - 315 Watts
Output voltage compliance: 12.0 to 17.0 V operating, >110 VDC during ignition.
Output regulation: output power held to within +/- 5% over all input, output, and environmental conditions.

Output current: 17.0 to 22.0 Adc, constant current
Output ripple: <0.7 Ap-p*
Efficiency: >70% at 300 W output, 120 VAC input
Thermal protection: ballast is disabled when temperature exceeds 90 deg C. Unit will automatically restart after cooling down.
Isolated Auxiliary output (UL-rated): +12V fan power, 800 mA max.
Optically Isolated Status & Control Connector (UL-rated circuit)

Remote Enable
Lamp Lit Status

Ground Leakage:

AXE: <300 µA
BXE: <10 µA
CXE: <100 µA

Regulatory Compliance: UL and CSA listed component (UL2601).

Line Input:	100 - 240 VAC, +/- 10%, 47 - 63 Hz, 6.5 Arms max.
Environmental:	0 deg C to 50 deg C operating.
Altitude:	-1000 ft. to 12,000 ft. MSL.
Weight:	2.5 lbs (1.14 Kg).
Dimensions:	6.50" x 4.65", 2.80" tall (165mm x 118mm, 71mm tall).
Ignitor:	25 KV ignition spike. Negative-side ignition. Minimum repetition rate is 10 strikes/second at all input voltages. Ignition pulses will continue until lamp ignites.
Ignitor Life:	>500,000 strikes.

* ripple is measured in a DC to 20 MHz bandwidth.

Specifications Subject to change without notice.

Product # 91454-00001

Revision B