|
Carsan Engineering, Inc.
221 Corporate Circle
Suite H
Golden, CO 80401
(303) 237-9608
|
Carsan Engineering, Inc.
CE160AXE, CE160BXE,
and CE160CXE
Xenon Power Supply
Specification
The CE160 power supply is designed to run xenon arc lamps
in a constant-power mode. The supply is designed to run the Osram XBO
and Cermax family lamps. The output power has two levels: 130W and 220W.
The unit is normally at 130W until the High Power remote input is asserted
true. The unit then outputs 220W. This is useful for pulsed power applications.
EMI line-filtering is built-in to the unit. The CE160BXE is the same as
the A-model except it does not have Y-capacitors in the line filter section.
The CE160CXE has smaller Y-capacitors to meet the 100 µA leakage
requirement of many U.S. hospitals.
Output power: 124 - 136 Watts, or 195 - 245 Watts,
constant power
Output voltage compliance: 12.0 to 17.0 V operating, >110 VDC
during ignition.
Output regulation: output power held to within +/- 5% over all
input, output, and environmental conditions.
| 
|
Output current: 9.0 to 22.0
Adc
Output ripple: <0.7 Ap-p (low power), <1.0 Ap-p (high
power)*
Efficiency: >70% at 220W output, 120 VAC input
Thermal protection: ballast is disabled when temperature
exceeds 90 deg C. Unit will automatically restart after cooling
down.
Isolated Auxiliary output (UL-rated): +12V fan power, 800
mA max.
Optically Isolated Status & Control Connector (UL-rated
circuit)
- Remote Enable
- Lamp Lit Status
- High/Low Power
| Ground Leakage: |
AXE: <300 µA |
| BXE: <10 µA |
| CXE: <100 µA |
|
Regulatory Compliance: Approved to UL2601 (E177225).
Complies with EN55011 Class B Emissions. CE-marked.
| Line Input: |
100 - 240 VAC, +/- 10%, 47 - 63 Hz, 4.5
Arms max. |
| Environmental: |
0 deg C to 50 deg C operating. |
| Altitude: |
-1000 ft. to 12,000 ft. MSL. |
| Weight: |
2.5 lbs (1.14 Kg). |
| Dimensions: |
6.50" x 4.65",
2.80" tall (165mm x 118mm, 71mm tall). |
| Ignitor: |
25 KV ignition spike. Negative-side
ignition.
Minimum repetition rate is 10 strikes/second at all input voltages.
Ignition pulses will continue until lamp ignites.
|
| Ignitor
Life: |
>500,000 strikes. |
* ripple is measured in a DC to 20 MHz bandwidth.
Specifications Subject
to change without notice.
| Product # 91460-00001 |
Revision C |
|
