|
Carsan Engineering, Inc.
221 Corporate Circle
Suite H
Golden, CO 80401
(303) 237-9608
|
Carsan Engineering, Inc.
CE100AXE
Xenon Power Supply
Specification
The CE100 power supply is designed to run xenon arc lamps in a constant-current mode. The supply is designed to
operate xenon arc-lamps in the 100 watt class, including the Cermax 100W and the XBO 100W. The output current is
adjustable from 7.0 to 9.0 Amps via a potentiometer on the circuit board. EMI line-filtering is built-in to the unit.
Output power: 80 - 110 Watts, constant current
Output voltage: compliance: 11.0 to 16.0 V operating, >110 VDC
during ignition.
Output regulation: output current held to within +/- 5% over all
input, output, and environmental conditions.
|
|
Output current: 7.0 to 9.0 Adc
Output ripple: <0.4 Ap-p *
Efficiency: >70% at 100 W output, 120 VAC input
Thermal protection: ballast is disabled when temperature
exceeds 90 deg C. Unit will automatically restart after cooling
down.
Auxiliary output (non-isolated): +12V fan power, 300 mA max.
| Ground Leakage: |
AXE: |
<300 uA at 136 VAC, <500
~uA at 265 VAC |
|
Regulatory Compliance: Designed to meet UL2601
|
Line Input:
|
100 - 240 VAC, +/- 10%, 47 - 63 Hz, 2.1
Arms max. |
|
Environmental:
|
0 deg C to 45 deg C operating. |
|
Al Altitude:
|
-1000 ft. to 12,000 ft. MSL. |
|
Weight:
|
2.0 lbs (0.9 Kg). |
|
Dimensions:
|
9.00" x 5.45",
2.75" tall (229mm x 138mm, 70mm tall). |
|
Ignitor:
|
25 KV ignition spike. Negative-side
ignition. Minimum repetition rate is 0.8 strikes/second at 90 VAC.
Typical repetition rate is 1.2 strikes/second (120 VAC).
Ignition pulses will continue until lamp ignites.
|
* ripple is measured in a DC to 20 MHz bandwidth.
Specifications Subject
to change without notice.
| Product # 91433-00001 |
Revision G
|
|
